Container plate equipment

The structure and performance of the box board machine and the operating procedures shall not start the machine. It is strictly forbidden to exceed. Small closed height for work, that is, the bottom surface of the box is sliding up to the working surface. The small distance of 290mm requires the height of the upper and lower molds after clamping, and the thickness of the upper and lower backing plates plus the thickness of the tile blank, which is not allowed to exceed 290mm. Through the pinion tile press, color steel tile press upper die stamping process.

Then when entering the side of the straightening mechanism, the box plate machine is used to avoid machine accidents. Always pay attention to the height of the lubricating oil in the sliding box and both sides of the body. The equipment should be wiped down frequently, kept clean, and free of mud. Drive the input axial tile machine, color steel equipment - angle chi forming machine pressure plate deviation debugging method, color steel equipment machine front and back two lines of four corners from the large frame to the upper end of the shaft height amount consistent, color steel equipment working process and adjustment method to produce the color plate bent or twisted straightening tile machine, find a line straightened. The main structural characteristics and structural composition of the box board machine:

1. The main structural characteristics of the box board machine:

A. The structure of the box board machine is simple, the appearance is beautiful, because the whole machine adopts the steel structure, and the overall processing is after welding, so the structure is simple and reasonable, the storage capacity is strong, and the operation is stable and reliable.

B. The box board machine is set up with other important components and components, which are all accessories with well-known domestic enterprises, so as to effectively ensure the performance of the equipment.

C. The box board machine adopts automatic fixed-length positioning and cutting, and the plate head and tail are beautiful and neat.

D. The equipment is easy to install and debug, simple and easy to operate.

E. The equipment has low noise, no pollution and low consumption.

2. Structural composition of box board machine equipment:

The equipment is composed of a discharging device, a forming roller host, a forming cut-off, a computerized hydraulic system, and a finished product supporting device.

Production process of box board machine equipment:

Unwinding-forming-shearing-bracket

Cabinet crane equipment composition:

A. 1 simple discharging machine

B. 1 molding host

C. 1 set of hydroforming shears and hydraulic station

D. 1 computer control console

E. 1 finished product bracket

The main technical parameters of the box board machine:

1. FRAME: WELDED WITH 400H STEEL, AND THE THICKNESS OF THE MIDDLE PLATE IS 18MM

2. Forming machine guide feeding frame form: lateral roller type

3. Forming machine form: wallplate chain drive

4. Shaft diameter: solid shaft: 100mm

5. Chain: 2 inches

6. Transmission power: 15KW

7. Forming machine linear speed: 2-8m/min

8. Number of forming machines: 16 molding.

9. Roll material: bearing steel

10. Hydraulic station motor: 4KW

11. Oil pump of hydraulic station: gear pump

12. Electronic control system: the whole machine adopts industrial computer PIC frequency conversion control

13. Equipment dimensions: about 9000*1300*1400mm

14. Rolling thickness: 1.5-2mm

15. Length fixing accuracy: ±3mm

The main structural characteristics of the box board machine:

1. The structure is simple, the appearance is beautiful, because the whole machine adopts the steel structure, and the whole machine is processed as a whole after welding, so the structure is simple and reasonable, the storage capacity is strong, and the operation is stable and reliable.

2. Other important components and components are set up with accessories from well-known domestic enterprises, so as to effectively ensure the performance of the equipment.

3. Fully automatic fixed-length positioning and cutting are adopted, and the plate-shaped head and tail are beautiful and neat.

4. The equipment is easy to install and debug, simple and easy to operate.

5. The equipment has low noise, no pollution and low consumption.

The box board machine is composed of a discharging device, a forming roller host, a forming cut-off, a computerized hydraulic system, and a finished product supporting device. The automobile box plate machine will be equipped with a set of lubrication system, when the machine is running, it will automatically lubricate all the bearing bearings, transmission gear mechanism motion guide rails and other parts. Automatic unwinding, blank taking working procedures: mold installation and host test run as above, and then open the air compressor, vacuum pump, extruder, tile cutting machine, unwinder, automobile box machine, main engine and tile conveyor, when stopping, stop the extruder first, and then stop the rest of the equipment.