80-300 flying saw C-beam forming machine

The C-beam finished products rolled by the 80-300 flying saw C-beam forming machine have good tensile bending performance, good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, fast and convenient installation.

How to maintain the 80-300 flying saw C-beam forming machine: Before using the 80-300 flying saw C-beam forming machine, it is necessary to check whether the connection is firm, install the bolts, whether the nuts are tightened, and the left and right chassis should be lubricated with enough oil in order to start the machine for test run.

80-300 flying saw C-beam forming machine can be used as the main stress structure of large and medium-sized industrial and civil buildings, such as workshops, warehouses, locomotive hangars, hangars, exhibition halls, theaters, stadiums, market sheds of roof load-bearing loads and wall flat support.

Flying saw punching C-beam machine is a single coil forming unit that can produce a variety of specifications of C-shaped purlin finished products with a set of rolls. The machine is mainly composed of passive charging rack, leveling device, punching device, cutting and punching device after forming, hydraulic pump station, industrial PLC full computer control system, etc. This machine adopts automatic flying saw punching, easy operation and other characteristics. The C-shaped steel finished product rolled by the C-beam forming machine has good tensile bending performance, good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, fast and convenient installation, and the product can be used as the main stress structure of large and medium-sized industrial civil buildings, such as workshops, warehouses, locomotive hangars, hangars, exhibition halls, theaters, stadiums, and market sheds of the roof load-bearing load and wall flat support. Cold-formed steel is the main material for making light steel structures, which is made of steel plate or steel strip cold formed forming. C-beam is automatically processed and formed by C-beam forming machine. The C-beam machine can automatically complete the forming process of the C-beam according to the given C-beam size. Scope of application of C-shaped steel: C-shaped steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light manufacturing.

C-shaped steel flying saw cutting, punching machine replaces the traditional template, improves the shortcomings of the traditional template, the construction is fast and simple, and the appearance of the product is neat and beautiful. C-shaped steel flying saw cutting, the steel pipe that has been formed by the punching machine should be cut by flying saw on the production line, and there are the following 4 products: punching and shearing cutting machine, disc cutting machine, knife cutting machine, flying saw cutting machine. Newly developed double-saw cutting machine and four-knife rotary sawing machine. Hydraulic, pneumatic and electric mobile trolleys are available. C-shaped steel flying saw cutting, punching machine adopts non-contact digital sensor, IPC and IPC control, and the sizing accuracy is high.

The C-beam flying saw cutting makes the C-beam machine easy to operate. C-shaped steel is not channel steel, it is made of thin plates such as 0.35 mm thick steel plates, which are used as purlins for steel structure workshops. The wall thickness of the C-beam machine can be made very thin, and the production process is greatly simplified and the production efficiency is improved. It can produce various profiles and cold-formed sections of different materials with uniform wall thickness but complex cross-sectional shapes that are difficult to produce by general hot rolling methods. C-beam machine equipment is a single-coil forming unit that can produce a variety of specifications of C-shaped purlin finished products by rolls.

The composition of the profile of the C-beam machine

The general section steel in the C-beam machine can be divided into large section steel, medium section steel and small section steel according to the metal product catalog.

1. Small section steel: the processing and use of small section steel in the angle, circle, square and flat steel are similar to those of large ones, and small diameter circles are often used as construction steel bars. Special-shaped steel includes retaining rings, horseshoe steel, magnetic pole steel, presser foot plate, shallow channel steel, small channel steel, T-shaped steel, ball flat steel, cloth tooth steel, hot-rolled hexagonal steel, etc. There are also rivet steel, tillage tool steel, and window frame steel.

2. Medium-sized steel: The use of medium-sized steel in work, groove, angle, round and flat steel is similar to that of large-scale steel. In addition, there are specially used to make the ploughshare steel of agricultural machinery ploughshare, elevator guide rail, wheel mesh steel used to make automobile wheel mesh, and composite flat steel for small tillage tools used to make tillage tools.

3. Large-scale steel: I-beams, channel steels, angle steels, and flat steels in large-scale steel are hot-rolled, and round steel, square steel, and hexagonal steel are not only hot-rolled, but also forging, cold drawing, etc. special-shaped steel medium tractor girder channel steel; Steel pile steel is used in water conservancy construction and mining projects; Tractor construction machinery track shoes, concave flat, ball flat steel, etc. Due to their proximity to the shape and size of the part or product, these profiled steels can greatly reduce machining, ensure product quality, and save metal.

How to use the C-beam machine accurately

It is forbidden to go beyond that. Small closed height for operation, that is, the bottom surface of the sliding box to all sides of the operation. A small distance of 290mm requires the height of the upper and lower molds after clamping, and the thickness of the upper and lower backing plates plus the thickness of the tile blank is not allowed to exceed 290mm. Always pay attention to the height of the lubricating oil in the sliding box and both sides of the body. The equipment should be scrubbed frequently, kept clean, and no mud and water should be accumulated.

Detailed technical parameters of 80-300 flying saw C-beam machine

The length of the equipment is 7600mm, the width is 950mm, and the height is 1000mm;

The power of the equipment is 11 kilowatts, and the power of the hydraulic station is 11 kilowatts;

The rolls are made of bearing steel (GR15), which are annealed after forging;

The base is made of 320 I-beam;

Adopt the lower five upper four levels to ensure smoothness;

The overmolding type is used to ensure that the product is square and right-angled, and the upper size can be made;

The thickness of the rolled material is 1.5mm-3mm (the thickness can also be designed according to user requirements);

The width of rolled C-beam is 80mm-300mm;

Rolling speed: 8-9m/min;

The new butt adjustment steel sleeve is adopted, which is simple, fast and firm;