C-shaped steel flying saw cutting machine

C-shaped steel flying saw cutting, punching machine rolled C-beam finished products have good tensile bending performance and good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, fast and convenient installation, the product can be used as the main force structure of large and medium-sized industrial civil buildings, such as workshops, warehouses, locomotive garages, hangars, exhibition halls, theaters, stadiums, market sheds of the roof load-bearing load and wall flat support.

C-shaped steel flying saw cutting, punching machine replaces the traditional template, improves the shortcomings of the traditional template, the construction is fast and simple, and the appearance of the product is neat and beautiful. C-shaped steel flying saw cutting, the steel pipe that has been formed by the punching machine should be cut by flying saw on the production line, and there are the following 4 products: punching and shearing cutting machine, disc cutting machine, knife cutting machine, flying saw cutting machine. Newly developed double-saw cutting machine and four-knife rotary sawing machine. Hydraulic, pneumatic and electric mobile trolleys are available. C-shaped steel flying saw cutting, punching machine adopts non-contact digital sensor, IPC and IPC control, and the sizing accuracy is high.

The C-shaped steel flying saw cutting machine is composed of a charging frame, a shaping system, a forming system, a correction system, a computer control system, a hydraulic system, a punching and shearing system, and the products produced are widely used in steel structure standard workshops and various simple sheds and other occasions, and are one of the indispensable equipment for making steel structure units.

The C-shaped steel flying saw punching equipment is mainly composed of several parts, such as passive discharge rack, discharge rack base, feeding introduction platform, leveling device, forming host, punching device, forming and cutting device, hydraulic station, computer control cabinet and so on.

The C-beam flying saw punching makes the C-beam machine easy to operate. C-shaped steel is not channel steel, it is made of thin plates such as 0.35 mm thick steel plates, which are used as purlins for steel structure workshops. The wall thickness of the C-beam machine can be made very thin, and the production process is greatly simplified and the production efficiency is improved. It can produce various profiles and cold-formed sections of different materials with uniform wall thickness but complex cross-sectional shapes that are difficult to produce by general hot rolling methods. C-beam machine equipment is a single-coil forming unit that can produce a variety of specifications of C-shaped purlin finished products by rolls.

Technical parameters of C-shaped steel flying saw cutting machine

1. Volume: 2.5 meters long, 2 meters wide and 1.5 meters high

2. Weight: about 1 ton

3. Main motor power: 15kw

4. Hydraulic pump station power: 4kw

5. Electrical appliances: imported Delta 24-point PLC, 18.5kw inverter, Ripu 600 wire, encoder. Chint, Delixi and foreign control parts

6. Saw blade: high-speed steel cutting pipe saw blade is used

7. Punching die: Cr12 round steel and plate quenching fine grinding line cutting

The C-shaped steel flying saw cutting machine is used to cut the continuous steel pipe into a pre-set length of finished pipe online, using non-contact digital sensor, IPC and IPC control, and high sizing accuracy.

C-shaped steel flying saw cutting machine its detailed parameters:

C-shaped steel flying saw cutting type: disc saw blade type; Trolley drive motor: low inertia DC motor; Trolley drive: motor reducer rack and pinion drive; Rise and fall of the saw head: cylinder driven, solenoid valve control; Clamping device: cylinder clamping, solenoid valve control; Cutting length: 5~8m; Cutting accuracy: ±3.0mm.