Z-beam forming machine

The main technical parameters of the waterproof steel plate forming machine

Forming shaft: 10 rows of forming shafts 7 leveling shafts Leveling roller: four rows of straightening side wheels 6 pairs of extruded side wheels The shafts are all #45 round steel quenched and tempered solid shafts of Φ90mm

Middle plate: 20mm thick

Large frame: 350mm H steel large frame

Wheels: bearing steel, quenched, quenched and tempered hard plated, 10 rows of forming wheels, two rows of extruded edge wheels, 4 rows of straightened side wheels

Weight: about five tons

Stand-alone installation dimensions: 6200×1000×900mm

Electronic control system: The whole machine adopts Taiwan Delta PLC electronic control control, and the counting is more accurate

Main engine power: 7.5KW cycloidal geared motor

Hydraulic shear power: 4KW

Z-beam is a common cold-formed thin-walled steel, with a thickness of 1.6-3.0mm and a cross-sectional height of 120-350mm. The processing material is hot-rolled (painted) and galvanized. The processing standard is implemented according to GB50018-2002. Z-beams are usually used in large-scale steel structure workshops. The processing length and hole are produced according to the processing requirements.

Note: The specifications of special Z-beam can be adjusted arbitrarily in the following sizes: 80~300 (mm) b: 40~100 (mm) t: 1.5~5.0 (mm) and can produce unequal Z-beam

The Z-shaped purlin rolled by the Z-shaped steel forming machine has good bending and compressive resistance, good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, and quick and convenient installation.

Z-shaped steel is widely used in automobiles, railway vehicles, building doors and windows, transportation, shelves, electrical cabinets, highway guardrails, building steel structures, containers, steel formwork and scaffolding, solar brackets, shipbuilding, bridges, transmission towers, steel sheet piles, cable trays, agricultural machinery, furniture, warehousing, guide rails, keel steel, vegetable greenhouses, pipeline supports, municipal construction and other fields.

1. Dimensions

Main machine: 10000mm*2000mm*1000mm

The full length of the assembly line; 17-20m

Rolling range: width 150-300mm, height 50-70mm

Rolling thickness: 3.5mm or less

Second, the material of the abrasive roll

1. Cr12 steel quenching hardness: 55°-60°

2. Shaft: 45# Diameter: ∮80mm

3. Productivity: 8-10m/min

The Z-beam forming machine is mainly composed of several parts, such as passive unloading rack, discharging rack base, leveling device, forming host, punching device, forming and cutting device, hydraulic station, computer control cabinet and so on.

The product can be used as the main stress structure of large and medium-sized industrial and civil buildings, such as factory buildings, warehouses, locomotive hangars, hangars, exhibition halls, theaters, stadiums, market sheds of roof load-bearing loads and wall support. The main products of Changlong Tile Press Factory: tile press, color steel tile press, color steel equipment, C-shaped steel machine, double-layer tile press, glazed tile machine, composite plate machine assembly line, angle chi tile press, floor deck machine, shearing machine/bending machine, trigger machine, color steel arch machine, roller shutter door equipment.

Z-shaped steel equipment is a Z-shaped purlin forming machine with automatic control of the whole process in combination with the characteristics of the main force structure of large and medium-sized buildings. The equipment adopts a series of automation devices such as computer control cabinet, automatic fixed-length cutting, automatic punching, etc., with stable operation, easy operation and high production efficiency, which brings convenience to users and saves investment costs.

Compared with other processes, the production process of Z-shaped steel does not add heat, no carbon and other harmful gas emissions, and can be used as a plant, warehouse, locomotive hangar, hangar, exhibition hall, theater, stadium, market trellis and other building roof load-bearing loads and wall support.

Z-beam equipment features:

1. Fully automatic production: PLC computer control cabinet, automatic feeding, automatic punching, fixed-length cutting, accurate and reliable;

2. Good molding quality: the formed Z-shaped steel has strong bending and compression resistance, good straightness and durability;

3. Achieve environmentally friendly production: no heating in the production process, no carbon and other harmful gas emissions;

Z-beam equipment is mainly composed of passive discharge rack, leveling device, forming host, forming cutting device, hydraulic station, computer control cabinet and other parts:

1. Unloading rack: large loading weight up to 7000KG;

2. Forming host: 13 groups of main rolls, 2 groups of feeding rollers, 6 groups of side rollers;

3. Cutting device: using flying saw cutting, automatic cutting to length after forming, no shape, no waste, high safety factor;

4. Electronic control system: the whole machine is controlled by PLC inverter;

The dimensions of Z-beam equipment are about 10.5m long× 1.7m wide× 1.2m high, rolling range: width 80-300mm, height 50-100mm, rolling thickness below 3.5mm, if special equipment is required.

Main technical parameters of Z-beam forming machine:

Installation dimensions: 23000×2400×1400mm

Electronic control system: the whole machine adopts PLC frequency conversion control

Main engine power: 11KW

Hydraulic shear power: 15KW

Production speed: about 9m/min

Hydraulic station pressure: 18-20Mpa

Purlin rolling specifications: 80-300 various