Mold button broken C-beam forming machine

The C-shaped steel forming machine, also known as the C-shaped steel machine, is composed of several parts, such as a discharge rack, a feeding introduction platform, a leveling device, a forming host, a punching device, a flying saw cutting device, a hydraulic station, and a computer control cabinet. The finished C-shaped purlin rolled by the machine has good bending and compression resistance, good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, and quick and convenient installation. The product can be used as the main stress structure of large and medium-sized industrial and civil buildings, such as factory buildings, warehouses, locomotive hangars, hangars, exhibition halls, theaters, stadiums, market sheds of roof load-bearing loads and wall support.

The main machine of the C-beam forming machine is 9 meters long, 1.1 meters wide and 1.6 meters high, and the net weight is 6 tons. The frame is made of 350H steel, the spindle is made of 45# round steel, and the wheels are all made of bearing steel, which has been quenched and tempered and quenched. The C-shaped steel is rolled by 14 rows of shafts, and is driven by sprockets, chains, and planetary cycloidal reducers. The motor power adopts 11KW-6 poles, and the production is 8-12 meters per minute. leveling device before leveling, using upper two lower three; After leveling, use one-to-one. The equipment adopts the form of external adjustment, single-sided adjustment, fast adjustment speed and simple operation. Semi-automatic equipment automatic on/off, automatic metering, cutting saw cutting; The fully automatic equipment includes all computer-controlled, automatic arbitrary punching. This machine is equipped with a set of uncoiling rack and a set of 6-meter discharging platform.

C-beam machine is a single coil forming unit that can produce a variety of specifications of C-shaped purlin finished products with rolls. The machine is mainly composed of passive charging rack, leveling device, punching device, forming cutting device, hydraulic station, computer control system, etc. This machine adopts automatic flying saw punching, easy operation and other characteristics.

The C-shaped steel products rolled by C-beam machine equipment have good tensile bending performance, good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, fast and convenient installation, and the product can be used as the main stress structure of large and medium-sized industrial civil buildings, such as workshops, warehouses, locomotive hangars, hangars, exhibition halls, theaters, stadiums, and market sheds of roof load-bearing loads and wall flat support. Cold-formed steel is the main material for making light steel structures, which is made of steel plate or steel strip cold formed forming.

The wall thickness of the C-beam machine can be made very thin, and the production process is greatly simplified and the production efficiency is improved. It can produce cold-formed sections of various profiles and different materials that are difficult to produce with uniform wall thickness but complex cross-sectional shapes that are difficult to produce by general hot rolling methods.

The main technical parameters of C-beam forming machine

1. Installation size: 13500mm× 2200mm×1500mm

2. Number of forming channels: 13-15

3. Roller material: GCR15

4. Main engine power: 11KW

5. Hydraulic station power: 11KW

6. Hydraulic station pressure: 18-20Mpa

7. Forming speed: 9-10m/min.

8. Cutter punching material: Cr12

9. Electronic control system: industrial computer PLC frequency conversion control

10. Plate thickness: 1.5-3.0mm

11. Rolling specifications: specifications in 80-300

12. Tendon (optional)