1050/1080 double glazed tile machine

1050/1080 double-layer glazed tile machine parameters:

The overall dimensions of the equipment are 6500mm*1300mm*1500mm

The weight of the equipment is 4200KG

Models 840/1050/900/1080 can be produced

The thickness of the pressure plate material is 0.3mm-0.8mm

The power of the molding unit is 3 KW

Hydraulic shear power 3 KW

Molding rate 8-10m/min

The feeding width is 1000-1250mm

The number of forming rows is 840/1050-11 rows and 900/1080-9 rows

Large frame: 300H steel, strong and stable

Thickness of the middle plate: 16mm

Spindle: material 45#, shaft diameter φ 70mm

Main motor power: 3KW, hydraulic shear power: 3KW

Roll die: 45# steel forgings are roughed by ordinary lathes, and finished by CNC lathes, polished and hard plated

Cylinder: bore 125mm

Stroke: 100mm

Reducer: planetary cycloidal needle, 1:59 speed ratio, 4# reducer

The transmission adopts 6 points of sprocket, chain drive, 4# 3Kw planetary cycloidal reducer, stable movement and no noise

The shaft is made of 45# steel, the diameter of the shaft body is 70mm after processing, and the mold wheel is processed and formed by 45# steel, and the surface is hard plated.

Middle plate: The connection is made of cast steel pull plate to ensure that the machine does not deform when rolling the thick plate.

1050/1080 double-layer glazed tile machine equipment is commonly known as widened double-layer tile machine equipment. As the name suggests, the version produced by this machine is the original board with a feed width of 1200mm. The 1050/1080 double-layer glazed tile machine equipment has made a new breakthrough on the basis of the original double-layer tile pressing machine equipment. The 1050/1080 double-layer glazed tile machine equipment can produce 4 different versions at the same time, namely 1050 and 1080 versions with a feed width of 1200mm, and 840 and 900 versions with a feed width of 1000mm. The realization of a double layer combination of roof tiles and wall tiles. The machine model change operation is simple, only need to adjust the width of the feeding platform to achieve multiple models at the same time.