We have used the tile press personnel know that the tile press is the use of hydraulic system for tile forming, it all rely on the hydraulic station to provide power for normal operation and work, so the hydraulic station has a very important role in the operation of the hydraulic tile press, which is also the place we must pay attention to when operating the tile press, once there is a problem in this place will affect the normal operation of the tile press, to our enterprise has an adverse impact, manufacturers in the customer parts configuration to buy good quality, Most of the core components we recommend to choose the product, the customer should also see clearly when buying, the hydraulic station to buy good quality products. After the hydraulic brick machine of some customers is started, the main pump of the hydraulic station is noisy, so we will analyze the reasons for this:
1. There is residual air in the hydraulic oil tank, which will make noise after being sucked into the main pump.
Second, before the trial operation of the new machine, it is necessary to check the operation of the motor, check the forward and negative rotation, and fasten the other parts, not too tight or too loose, and leave the gap, do not let friction occur between them.
3. The circulating oil circuit of the hydraulic station is blocked, resulting in the untimely supply of hydraulic oil, when the main oil pump absorbs a large amount of oil, the oil tank returns small, and the air takes the opportunity to enter the main pump.
For example, the main pump of the hydraulic tile press sucks in compressed air, and the exhaust port on the main pump can be opened, and the air in the circulating pipeline is discharged before operation. Equipment problems are often encountered in our production, the important thing is not to encounter problems to be afraid, complain about the manufacturer, but to take the initiative to contact the manufacturer to deal with the problem, sometimes it is a fault caused by the mistake of the worker, so the production training is to be insisted on, and we must pay attention to the maintenance when using the tile press, do not use it and leave it alone, to carry out regular maintenance and inspection, and add lubricating oil to the place where the friction needs to be good.
