Three-dimensional pull the trigger

The three-dimensional trigger adopts galvanized sheet as the substrate and uses . The eco-friendly polyester baking paint is the top coat, and the unique features of the sheet are:

1. The three-dimensional plate made of metal material is not shaped, not damaged, anti-fouling, weather-resistant, heat-resistant, and its substrate is galvanized material with unique places such as anti-rust and anti-corrosion.

2. The paint film of environmentally friendly polyester baking paint is full and the toughness of the paint film is good.

3. The appearance of metallic texture is super strong.

4. The hardness of the paint film is high, and the scratch resistance is better than that of other paint series.

Characteristics of the milling process of the three-dimensional trigger machine:

1. The production efficiency is high but unstable

Because milling is a multi-edge cutting and a large cutting speed can be selected, the milling efficiency is high. However, due to various reasons, it is easy to lead to uneven load and inconsistent wear of the cutter teeth, which causes the vibration of the machine tool, resulting in unstable cutting, which directly affects the surface roughness of the workpiece.

2. Intermittent cutting

The impact generated when the milling cutter teeth are cut in or out, on the one hand, reduces the life of the tool, and on the other hand, causes periodic shocks and vibrations. However, due to the intermittent cutting of the cutter teeth, the working time is short, and the cooling time in the air is long, so the heat dissipation conditions are good, which is conducive to improving the durability of the milling cutter.

3. Semi-closed cutting

Since the milling cutter is a multi-tooth tool, the space between the cutter teeth is limited, and if the chips cannot be discharged smoothly or there is enough flute, the milling quality will be affected. or cause the damage of the milling cutter, so when choosing the milling cutter, the chip flute should be considered as an important factor.