750 type floor decking machine

Parameters of 750 floor decking machine:

Length*width*height: 12000mm*1500mm*1500mm

Machine weight: about 7.5T

Frame material: 350H steel

Thickness of the middle plate: 14 mm

Forming shaft: 75mm diameter solid shaft

Forming wheel: material 45# forging, high-frequency quenching, hard chrome plating

Transmission: 1.5 inch sprocket, 1.5 inch chain computer controlled

Main engine power: 11KW No. 8 reducer

Number of forming rows: 22 rows

Pressing width: 1250mm

Middle spacing: 187.5mm Groove depth: 75mm

Characteristics of steel floor deck produced by 750 type floor deck machine:

1) Light weight, high strength, heavy bearing and good seismic resistance;

2) The construction is simple and fast, and the assembly is convenient;

3) Replace the traditional template and improve the shortcomings of the traditional template;

4) It can be used as a part of the structural strength to reduce the material cost;

5) Easy reinforcement, wiring, piping construction;

6) The appearance is neat and beautiful;

Construction sequence of 750 type floor deck machine steel floor deck - concrete composite structure:

1) The surface of the steel beam is clear and clean, and the steel floor plate is welded on the steel beam according to the plate plan;

2) according to the welding procedure, the steel bearing plate is welded on the steel beam;

3) the buckle between the diamond bearing plates is fixed with a clamp;

4) The scissors are fixed with a welding torch at the composite wind beam;

5) According to the design requirements to help tie the steel mesh;

6) Carry out concrete pouring.

The 750 floor deck machine replaces the traditional formwork, improves the shortcomings of the traditional formwork, the construction is fast and simple, and the appearance of the product is neat and beautiful.

The product of 750 type floor deck plate machine is made of galvanized steel plate by roll cold bending, and its cross-section is V-shaped, U-shaped, trapezoidal or similar to these shapes of waveform, which is mainly used as a permanent template, and can also be selected for other purposes.