Reducer

One. Product Introduction:

The reducer is a kind of power transmission mechanism, which uses the speed converter of the gear to reduce the number of revolutions of the motor (motor) to the required number of revolutions and obtain a larger torque mechanism, which is widely used at present.

Two. How the product works:

Planetary reducer is generally used for low-speed and high-torque transmission equipment to put the motor. The power of the internal combustion engine or other high-speed operation through the input of the reducer The gear with a small number of teeth on the shaft meshes the large gear on the output shaft to achieve the purpose of deceleration, and the ordinary reducer will also have several pairs of gears with the same principle to achieve the ideal deceleration effect, and the ratio of the number of teeth of the large and small gears is the transmission ratio.

Three. Product Notes:

1. When changing the oil, wait for the reducer to cool down and there is no danger of combustion, but it should still be kept warm, because after complete cooling, the viscosity of the oil increases, and it is difficult to drain the oil. Note: Cut off the power supply to the transmission to prevent inadvertent power-up!

2. In the work, when it is found that the oil temperature rises more than 80 °C or the oil pool temperature exceeds 100 °C and abnormal noise and other phenomena, it should be stopped, the cause must be checked, the fault must be eliminated, and the lubricating oil can be replaced before it can continue to operate.

3. The user should have reasonable rules and regulations for use and maintenance, and the operation of the reducer and the problems found in the inspection should be carefully recorded, and the above provisions should be strictly implemented.