Water - stop steel plate forming machine

Production speed: about 8-10m/min

Hydraulic station pressure: 18-20Mpa

Purlin rolling specifications: 300-500mm in various specifications, the small side is 50mm into a 45° angle

Plate thickness: 1.8-4mm

Features of waterproof steel plate forming machine:

(1) Adopt high-level automatic control software to realize production information management.

(2) The automatic control system of the whole unit adopts a highly integrated network, which makes the performance of the automation system more superior.

(3) Construction waterstop equipment, the color steel tile equipment also has the advantages of operation, maintenance, maintenance, mechanical debugging, and easy mold replacement.

The wall thickness of the waterproof steel plate forming machine can be made very thin, and the production process is greatly simplified and the production efficiency is improved. It can produce various profiles and cold-formed sections of different materials with uniform wall thickness but complex cross-sectional shapes that are difficult to produce by general hot rolling methods.

The finished product of the water-stopping steel plate rolled by the water-stopping steel plate forming machine has good tensile bending performance, good straightness, automatic fixed-length automatic cutting, high degree of automation, fast and convenient installation, and the product can be used as the main stress structure of large and medium-sized industrial civil buildings, such as workshops, warehouses, locomotive hangars, hangars, exhibition halls, theaters, stadiums, and market sheds of the roof load-bearing load and wall flat support.

Instructions for use of waterproof steel plate machine

The water-stopping steel plate machine is a single-coil forming unit that can produce a variety of specifications of water-stopping steel plate finished products with rolls. The machine is mainly composed of active material device, leveling device, profiling device, squeezing edge to increase thickness device, forming cutting device, hydraulic station, computer control system, etc., this machine adopts automatic flying saw punching, easy operation and other characteristics.

The waterproof steel plate equipment is mainly composed of several parts, such as the active material shaft, the leveling device, the thickening side wheel, the forming host, the forming cutting device, the hydraulic station, and the computer control cabinet.

Characteristics of waterproof steel plate equipment: The equipment adopts automatic control software to realize production information management. The sink equipment also has the advantages of simple operation, easy maintenance, maintenance, mechanical debugging, and easy mold replacement. The whole equipment automation control system adopts a highly integrated network, which makes the automation system performance more superior.

The automatic water-stopping steel plate machine is mainly composed of several parts, such as the active belt shaft, the leveling device, the thickening side wheel, the forming host, the forming cutting device, the hydraulic station, and the computer control cabinet.

Automatic water-stopping steel plate machine adjustment: unilateral adjustment, there is a hand-adjusted lock nut on the left side of the machine wallboard, the wheel and spacer on the loose lock nut shaft can be loosened, and there are movable spacers on both sides of the wheel, for example: 80mm modulation 160mm, just take a 40mm spacer on both sides of the wheel and put it in the middle of the wheel, you can, keep the center line unchanged, and the flying saw punching hole should punch the center hole, so that our machine flying saw can be fixed, and will not waste materials, and the machine is adjusted in the same industry. Convenient.;